Panasonic AG-HPX600 to FCP Converter-convert AVC-Intra MXF to FCP ProRes

Posted by admin | Comments are off for this article

Do you have the Panasonic AG-HPX600 camera? Panasonic AG-HPX600 features a 2/3″ MOS Sensor and records Full HD 1080p video in AVC-Intra 10-bit with 4:2:2 chroma sampling. Other available video formats include DVCPRO HD, DVCPRO50, DVCPRO, DV and optional compatibility with the newly developed AVC-ULTRA. The MOS sensor attains high F12 sensitivity (at 60 Hz) and a signal-to-noise ratio of 59 dB. Weighing in at 6.6 lb, the HPX600 is among the lightest 2/3-type shoulder mount camcorders. The HPX600 utilizes Panasonic’s P2 memory card system.

Panasonic AG-HPX600 Highlights
* ENG Style Shoulder Mount with 2/3 Sensor
* AVC-Intra 10-bit 4:2:2 Recording
* Optional Compatibility with AVC-ULTRA
* Chromatic Aberration Compensation
* Flash Band Compensation
* Focus Assist, Expand and Focus Bar
* Waveform and Vectorscope
* Camera Remote Interface
* PAL & NTSC Switchable (50 & 59.94Hz)
* Low Power Consumption of 18W

But, some users have encountered problems when they try to import Panasonic AG-HPX600 AVC-Intra MXF to Final Cut Pro, the main program is that the footages can’t be imported or edited smoothly, what’s the reason? It is because the Panasonic AG-HPX600 AVC-Intra MXF video format not friendly to these editing softwares, every software has its best supported video codec and format, only with the best format users can avoid importing and editing problems.

How to solve Panasonic AG-HPX600 AVC-Intra MXF to Final Cut Pro 6/7/X importing problems?

FCP 7 and FCP X supported best video format is Apple ProRes 422 codec MOV format, and AVC-Intra MXF format is not friendly for editing, so FCP 7/X doesn’t support Panasonic AG-HPX600 AVC-Intra MXF footages well. The best method to solve this problem is to convert Panasonic AG-HPX600 AVC-Intra MXF footage to ProRes for editing in Final Cut Pro 7/X, you can follow the steps below to transcode Panasonic AG-HPX600 AVC-Intra MXF to FCP 7/X via Panasonic AG-HPX600 to FCP Converter.

Buy MXF Converter for Mac Now Free Download MXF Converter for Mac

1.Load AVC-Intra MXF files into Panasonic AG-HPX600 Video Converter from UFUSoft

After install and launch the UFUSoft MXF Converter for Mac, drag and drop Panasonic AG-HPX600 AVC-Intra MXF file. You can drag several files to the program directly.

2.Choose output format
Apple ProRes MOV is the best format for Final Cut Pro, here you just need to choose the target application as output format, for example, “Final Cut Pro->Apple ProRes 422(*.mov)”.

3. Do some settings as you want.

4.Transcode Panasonic AG-HPX600 AVC-Intra MXF to FCP 7/X

At last, hit the “Convert” button to transcode Panasonic AG-HPX600 AVC-Intra MXF to FCP 7/X.

With this Panasonic AG-HPX600 AVC-Intra MXF to Apple ProRes 422 converter, you can easily change Panasonic AG-HPX600 AVC-Intra MXF files to FCP 6/7/X for editing, this software runs fast, so you can convert your Panasonic AG-HPX600 AVC-Intra MXF footages to FCP 6/7/X in less time, video and audio synchronization are perfectly guaranteed.

Buy MXF Converter for Mac Now Free Download MXF Converter for Mac